Nowadays, in towns, street lights can be seen anywhere on both sides of the road, mainly because they are environmentally friendly, do not require electricity, and are easy to install.
1. Select a light source
Firstly, determine the power of the light used for LED courtyard light manufacturer configuration. Solar street lights use LED light sources and typically use 1W high-power beads. Usually, the power is 1W, and some power uses low power, such as 2835 or 5070, low power lamp beads. Rural road lighting is usually 30-60 watts, while urban highways require more than 60 watts of power. If the LED light source exceeds 120 watts, it is not recommended to use solar energy because the configuration is too high and the cost is high.
2. Solar panels from LED courtyard lamp manufacturers
Solar panels are divided into single crystal and polycrystalline. The price of monocrystalline silicon is higher than that of polycrystalline silicon. As customers do not have professional measuring instruments when purchasing, it is recommended to use size areas for measurement. The larger the area, the larger the size of the solar panel, which is directly proportional to the power of the solar panel. Based on the power and sunlight duration of the lampholder, selecting the appropriate solar panel and battery requires scientific calculations to obtain the parameters.
3. Battery
LED garden lamp manufacturers generally have three types of batteries: lead-acid batteries, ternary lithium batteries and lithium iron phosphate battery. The common lithium iron phosphate battery in the market is a second-hand or disassembled 32650 cylindrical battery, which is currently widely used in lithium iron phosphate battery and lithium battery. The cost of phosphate batteries is higher than that of lithium batteries, so the cost of Jiangxi solar street lamps is relatively high. This battery is higher than lead-acid batteries, while the cheaper one is second-hand block batteries.
4. LED courtyard lamp manufacturers' street lamp poles
Mainly considering the upper and lower diameters, height, thickness, shape, and surface treatment of the rod. The larger the diameter or height, the thicker the rod, and the higher the price; The more complex the shape of the rod, the higher the price; The total cost of hot-dip galvanized surface treatment is higher than that of hot-dip galvanized sheet, while the cost of hot-dip galvanizing is higher than that of cold dip galvanizing, and the cost of plastic spraying is higher than that of surface spraying.
